Solids UV Epoxy Clear (1377MUV)

  • Solids UV Epoxy Clear: (1377MUV)

    Product Mixing Instructions: This product has a mix ratio of 9.0# part A to 4.15# part B. Standard packages are in pre-measured kits and should be mixed as supplied in the kit. We highly recommend that the kits not be broken down unless suitable weighing equipment is available. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. After mixing, transfer the mixed material to another pail (the transfer pail) and again remix. The material in the transfer pail is now ready to be applied on the primed substrate. Improper mixing may result in product failure....Read More or Get the Datasheet

  • Power Trowel Epoxy Mortar Resurfacer: (1100)

    Product Mixing Instructions: Mix the liquids to be used in the power trowel mortar system at the recommended mix ratio. Thoroughly mix the combined components A and B with a jiffy mixer or other suitable equipment. Continue to mix for a couple of minutes to insure the material is mixed well. After the liquids are thoroughly mixed, pour the liquids into a Koel mixer, mud mixer or other suitable mixer (depending on batch size). After the liquids are in the mixer, immediately add the special aggregate blend into the mixer. The amount of aggregate should not exceed 37 pounds of the aggregate to 1/2 gallon of mixed liquids. For best results, we recommend a 7:1 aggregate to liquid ratio. Mix the aggregate in thoroughly to insure it is wetted out and uniform in saturation. Improper mixing may result in product failure....Read More or Get the Datasheet