Epoxy Mortar Grout Coat (944)

  • Epoxy Mortar Grout Coat: (944)

    Product Mixing Instructions: This product has a mix ratio of 2 parts A (8.7-8.9#/gallon) to 1 part B (3.95#/gallon) by volume for standard colors, and 9.3# part A to 4.6# part B for the clear. Standard packages are in pre-measured kits and should be mixed as supplied in the kit. We highly recommend that the kits not be broken down unless suitable weighing equipment is available. However, a direct 2:1 mix proportioning by volume can be employed. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. Continue mixing for another couple of minutes to insure a homogeneous mixture. Make sure you scrape the bottom and sides of the pail while mixing. Improper mixing may result in product failure....Read More or Get the Datasheet

  • Epoxy Oil Stop Primer: (8200)

    Product Mixing Instructions: This product has a one to one mix ratio by volume- merely mix equal volumes such as 1 gallon of part A to 1 gallon of part B. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until streak free. Improper mixing may result in product failure....Read More or Get the Datasheet

  • Epoxy Crack Filler: (8188)

    Product Mixing Instructions: This product has a mix ratio of 1 part A to 1 part B by volume. To mix, simply measure out equal volumes of the material and mix them together thoroughly with slow speed mixing equipment such as a jiffy mixer, putty knife or spatula until the material is thoroughly mixed and uniform in color. Mix only an amount of material that can be used in the allotted pot life period. Improper or insufficient mixing may result in product failure....Read More or Get the Datasheet

  • Conductive Epoxy Primer: (1455CP)

    Product Mixing Instructions: Mix equal volumes such as 1 gallon of part A to 1 gallon of part B. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. Improper mixing may result in product failure. Suitable mixing equipment may be necessary to remix in settled metallic pigment....Read More or Get the Datasheet

  • Solids Epoxy: (7077LVP)

    Product Mixing Instructions: This product has a mix ratio of 12# part A to 3.85# part B for standard colors. Standard packages are in pre-measured kits and should be mixed as supplied in the kit. We highly recommend that the kits not be broken down unless suitable weighing equipment is available. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. After mixing, transfer the mixed material to another pail (the transfer pail) and again remix. The material in the transfer pail is now ready to be applied on the primed substrate. Improper mixing may result in product failure....Read More or Get the Datasheet

  • Solids Epoxy: (7077)

    Product Mixing Instructions: This product has a mix ratio of 12# part A to 4.15# part B or two parts A to one part B by volume for standard colors. Standard packages are in pre-measured kits and should be mixed as supplied in the kit. We highly recommend that the kits not be broken down unless suitable weighing equipment is available. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. After mixing, transfer the mixed material to another pail (the transfer pail) and again remix. The material in the transfer pail is now ready to be applied on the primed substrate. Improper mixing may result in product failure....Read More or Get the Datasheet

  • Novolac Epoxy Primer: (2577)

    Product Mixing Instructions: This product has a mix ratio of 9.95# part A to 4.15# part B by weight. Merely mix the two components together. After the two parts are combined, mix well with slow speed mixing equipment such as jiffy mixer until the material is thoroughly mixed and streak free...Read More or Get the Datasheet

  • Novolac Epoxy Topcoat: (2533)

    Product Mixing Instructions: This product has a mix ratio of 10.15# part A to 4.2# part B for standard colors. Standard packages are in pre-measured kits and should be mixed as supplied in the kit. We highly recommend that the kits not be broken down unless suitable weighing equipment is available. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. After mixing, transfer the mixed material to another pail (the transfer pail) and again remix. The material in the transfer pail is now ready to be applied on the primed substrate. Improper mixing may result in product failure....Read More or Get the Datasheet

  • Seamless Epoxy Binder: (137MUV)

    Product Mixing Instructions: This product is packaged with a gallon container of part A (8.3#) and a gallon container of part B (9.75#) with an aggregate component consisting of one bag (30#). Standard packages are in pre-measured kits and should be mixed as supplied in the kit. We highly recommend that the kits not be broken down. Add the part B component to an oversized mixing container first, followed by the part A component. After the two liquid parts are combined thoroughly and streak free, add in the provided aggregate and mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and uniform in color. After mixing, transfer the mixed material to another pail (the transfer pail) and again remix. The material in the transfer pail is now ready to be applied on the prepared substrate. Remix occasionally to prevent settling of aggregate. Improper mixing may result in product failure....Read More or Get the Datasheet

  • Solids UV Epoxy Clear: (1377MUV)

    Product Mixing Instructions: This product has a mix ratio of 9.0# part A to 4.15# part B. Standard packages are in pre-measured kits and should be mixed as supplied in the kit. We highly recommend that the kits not be broken down unless suitable weighing equipment is available. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. After mixing, transfer the mixed material to another pail (the transfer pail) and again remix. The material in the transfer pail is now ready to be applied on the primed substrate. Improper mixing may result in product failure....Read More or Get the Datasheet

  • Flexible Solids Epoxy: (1399)

    Product Mixing Instructions: This product has a mix ratio of 9.2# part A to 8.2# part B or one part A to one part B by volume. Standard packages are in pre-measured kits and should be mixed as supplied in the kit. We highly recommend that the kits not be broken down unless suitable weighing equipment is available. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free....Read More or Get the Datasheet

  • Power Trowel Epoxy Mortar Resurfacer: (1100)

    Product Mixing Instructions: Mix the liquids to be used in the power trowel mortar system at the recommended mix ratio. Thoroughly mix the combined components A and B with a jiffy mixer or other suitable equipment. Continue to mix for a couple of minutes to insure the material is mixed well. After the liquids are thoroughly mixed, pour the liquids into a Koel mixer, mud mixer or other suitable mixer (depending on batch size). After the liquids are in the mixer, immediately add the special aggregate blend into the mixer. The amount of aggregate should not exceed 37 pounds of the aggregate to 1/2 gallon of mixed liquids. For best results, we recommend a 7:1 aggregate to liquid ratio. Mix the aggregate in thoroughly to insure it is wetted out and uniform in saturation. Improper mixing may result in product failure....Read More or Get the Datasheet

  • Water Based Epoxy: (0155)

    Product Mixing Instructions: This product comes pre-packaged by weight. Kits should be mixed in their entirety. If partial kits are to be used, refer to the front of this technical data for proper weight mix ratios. After the two parts are combined, mixes well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. This product is an emulsion product and should be mixed well before using....Read More or Get the Datasheet

  • Cove Master Epoxy Mortar: (11)

    Product Mixing Instructions: It is important that the liquids be mixed together first. Mix the liquids in an oversized container thoroughly and until streak free. After the liquids are thoroughly mixed, add in the aggregate. Mix in the aggregate with slow speed mixing equipment such as a jiffy mixer or rotating bucket/stationary mixing blade assembly. It is equally important that enough time is spent mixing in the aggregate to insure that the aggregate is thoroughly wetted out. No induction time is necessary. Improper mixing may result in product failure....Read More or Get the Datasheet

  • Static Dissipating High Build Epoxy: (1833C)

    Product Mixing Instructions: Mix two parts A to one part B by volume [(10.9# part A) to (5.0# part B)]. This product should be mixed with a standard type paint shaker prior to combining the two components. Weight mix ratios will be more accurate than volume mix ratios if breaking down the premeasured kits. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. Improper mixing may result in product failure. Apply only over concrete. Do not apply over other coatings not specifically recommended. IMPORTANT NOTICE: Any compacted settlement in the bottom of containers must be thoroughly mixed into the liquid before using. Suitable mixing equipment may be necessary to remix in settled metallic pigment....Read More or Get the Datasheet

  • Power Trowel Primer: (1622)

    Product Mixing Instructions: Mix the liquids in an oversized container thoroughly and until streak free. No induction time is necessary. The mix ratio is two to one by volume. Improper mixing may result in product failure....Read More or Get the Datasheet

  • High Wear Urethane: (3599)

    Product Mixing Instructions: This product has three components. The part A should be mixed with the part B thoroughly and then the part C should be added and mixed in well to insure a uniform mixture. The kits come prepackaged and should be used in their entirety and should not be broken down. If a color pack is used, it is recommended that the color pack be combined with the part A and part B prior to adding the part C aggregate and then mixed well. After the three (or four, if color packs are used) parts are combined, mix extremely well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. Avoid whipping air into the coating. Improper mixing may result in product failure. Once the material is opened, it cannot be re-sealed for later use....Read More or Get the Datasheet

  • Flexible Joint Sealant: (8299)

    Product Mixing Instructions: It is important that the material be mixed well. Therefore take a few extra minutes to make sure adequate time has been taken to mix the two components together thoroughly. Improper mixing will cause an incomplete cure and soft spots in the joint. Mix one part (by volume) part A to one part (by volume) part B in an oversized mixing container. Mix well with slow speed mixing equipment until totally streak free being sure to scrape the sides and bottom of the mixing container thoroughly. Avoid high speed mixing as this could force air into the product....Read More or Get the Datasheet

  • Static Dissipating Urethane: (3244C)

    Product Mixing Instructions: Mix two parts A to one part B by volume. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. Suitable mixing equipment may be necessary to remix in settled metallic pigment....Read More or Get the Datasheet

  • Anti-Static Conductive Primer: (1444C)

    Product Mixing Instructions: (1444C) Mix one part A to one part B by volume. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. Improper mixing may result in product failure. Suitable mixing equipment may be necessary to remix in settled metallic pigment....Read More or Get the Datasheet